en
de
Lab Fast Pro Nutsche Filter
- Universal support frame, that accommodates vessels from 1l to 10l
- Temperature range: -90ºC to +200ºC
- Three sizes of the main flange (DN100, DN150, DN200) available to work with different sizes of the vessels
- Full-jacketed design with deflector guarantees efficient heating and cooling right from the bottom up to the top
- Set of different plug&play packs (reflux, liquid dosing etc) to meet your process requirements
Overview
The Lab Fast Pro Nutsche Filter was designed by collective efforts of chemists and engineers for chemists. It allows to work with vessels of different sizes by changing the glassware in mere minutes, not hours. A unique frame design allows you to easily operate the filter.
This concept will not only save you time, but also money. Through the universal design and the usage of standard joints allows the usage of any thermostats, pumps and glassware from any manufacturer, thus giving unmatched flexibility. If you need even more versatility, you can always ask for additional customization, we are ready to help!
Why you should buy this system from NORMAG
UNIVERSAL SUPPORT FRAME
- Vessels from 100ml to 10l on one support bench-top frame
- Fits reactors, filters, filter-reactors
- PE drip tray
UNIQUE CLAMP
- Holds vessel even when lid clamp is opened
- No tools or additional accessories are required to mount the vessel or to regulate tightness of the seal.
VESSELS WITH MAXIMUM FILTRATION AREA
-
Neck of the vessel depends on the size.
- DN100 – 1l (0.008m2)
- DN150 – 3l, 5l (0.017m2)
- DN200 – 10l (0.030m2)
- Non jacketed and full-jacketed design depending on your process requirements
- Integrated deflector for the jacket inlet port to ensure even heating or cooling all along the vessel’s wall
Unique tool free clamping mechanism for the filter bottom.
- Full chemical resistance – only glass and PTFE is in contact with product
- Integrated feet allows you to place the bottom part anywhere without being afraid of damaging the glass drain valve
- Tilting mechanism for easy discharge of the product.
- Accommodates any filter materials with thickness up to 1mm
UNIQUE STIRRER GUIDE
- No PTFE flaking thanks to PEEK-to-Glass sealing
- Working 24/7 from a slight overpressure down to 7mbars
- Only PTFE, glass and PEEK are exposed to vapors/media, which guarantees perfect chemical resistance
Manual stirring with adjustable position of the stirrer blades for replacement washing and smoothening the surface during filtration
UNIVERSAL LID OF THREE SIZES (DN100, DN150 and DN200) WITH 1 CENTRAL AND 5 PERIPHERICAL NECKS
- allows to install not just stirrer guide and condenser, but also different sensors, dosing funnels for liquids and solids and many more
- Security joints (SJ) for a reliable glassware fixation without additional clamps
- Standard B-type joints 4xSJ29/32 and 2xSJ19/26 allow to use anyglassware from 3rd-party manufacturers
Additional modules and accessories
1.
Set of drain and ventilation valves with clamps for easy draining of HTF (oil), when replacing one vessel with another
2.
Distillation module. Includes reflux divider with receiving flask of your choice and set of PTFE tubes and fittings. Allows to work in filter-dryer mode and dry the sediment after filtration
3.
Liquid dosing module. Includes a chemical resistant membrane pump with a dosing speed starting from of 0.03ml/min and all necessary clamps to fix it on the frame and fittings to connect it to the reactor
4.
Range of different stirrer shafts with additional rotors for better mixing of even high viscos media
5.
Liquid dosing with jacketed and non jacketed funnels with volumes from 50ml to 1000ml
6.
Customizable PTFE lids to work with heavy equipment like homogenizers or ultrasonic generators.
7.
Fittings for an easy and tight connection of bottom drain valve to other units like receiver, filter, another reactor etc
NORMAG Lab & Process Glass Custom Solutions
You need customizations that are tailored to your exact needs.
Contact us, we will find the right solution for you.
The Normag experts are there for you, listen to you, develop with you and for you the customized solution that gives you all the freedom.
Do you have an inquiry?
Contact the GMM Pfaudler Group via the dedicated form or consult the list of locations worldwide. We will provide a single point of contact through our sales, service and internal support groups.
Download Reactor Lab Fast Pro brochure
eBrochure
Reactor Lab Fast Pro
How can we help you?
Our team is at your disposal to facilitate your steps and offer you personalized support.
